Image wobbling stabilization

mkupfer · Unread post by **mkupfer** » April 6th, 2018, 2:54 pm

I have the Ricoh R mounted from the ceiling and the unit appears to be stable and not moving, however when you look at the streaming video on youtube, the image is constantly wobbling.

I am using the Ricoh R connected to a teradek vidiu for youtube streaming.

Any thoughts on how to correct for this?

https://www.youtube.com/watch?v=Bw58ScpOqNI

Unread post by **take10** » April 12th, 2018, 8:02 am

Hi,mkupfer.
It is necessary to change Top/Bottom correction setting from RICOH R Console.
If you set it by the following method, please confirm that the shake will be alleviated.

1. Set RICOH R to HDMI output mode (blue lamp)
2. Connect to PC via USB and start RICOH R Console
3. Set Top/Bottom Correction Downward
4. Preset setting on RICOH R Console

When live streaming with USB output, please set to the USB output mode (green lamp) after the above setting.
Thank you.

mkupfer · Unread post by **mkupfer** » June 20th, 2018, 6:47 pm

Thank you Take10, this did resolve the image wobbling issue.

EssyBuh · Unread post by **EssyBuh** » May 23rd, 2019, 7:44 pm

how do I have to do for put an image here and in the blog??
can someone tell me step by step?
because I dont know and Im going mad...

Unread post by **maruo2** » May 27th, 2019, 1:23 am

hi

Describes how to put the pictures on this blog.

1. an image upload another web site, then get uploaded image url. (the blog can't upload images)
2. that image url wrtites the blog to use img tag.

sample (check to "Reply with quote" from this post)

MaxBuh · Unread post by **MaxBuh** » October 4th, 2019, 3:41 pm

If I just want to reduce a jpeg from 85 k to perhaps 10 k will that reduce load time and how do I do this? In save as section will it prompt for size of image? I am working on a spiritual church web site as a volunteer.