Streaming using Cerevo LiveShell X

kreeve · Unread post by **kreeve** » July 21st, 2017, 7:54 pm

I have my Ricoh R connected to a Crevo Liveshell X. What settings do I need to do to get the video to stream as 360 so Facebooklive and others receognize it as such?

Kevin

codetricity · Unread post by **codetricity** » July 22nd, 2017, 3:10 pm

Kevin, this document might help you.

http://lists.theta360.guide/t/youtube-3 ... vidiu/1419

For the Teradek VidiU, I needed to set This Live Stream is 360 on YouTube

This is under the Basic Info section of YouTube

If you are new to using 360 live streaming in general, here's a guide that might help

http://theta360.guide/community-documen ... aming.html

I'm using the RICOH R Development Kit with VidiU. I need to use the YouTube Control room also.

codetricity · Unread post by **codetricity** » July 24th, 2017, 8:02 pm

I posted a new article which summarizes the Ricoh R Dev Kit guide for using Cerevo LiveShell.X. See the article here.

I also suggest you look at my How To: Facebook Live 360 with RICOH THETA S

kreeve · Unread post by **kreeve** » August 17th, 2017, 5:32 pm

Thanks, It is working.

radimidia · Unread post by **radimidia** » August 21st, 2017, 4:06 pm

Gentlemen, what would be the transmission speed of the camera? I'm researching USB to RJ45 adapters, but I need to know what the transfer speed of the camera. Thank you!

Unread post by **take10** » August 24th, 2017, 12:21 am

Hi, radimidia.

USB transmission speed of RICOH R is 480Mbps.

Thanks!

Michaeldopsy · Unread post by **Michaeldopsy** » August 14th, 2019, 4:09 pm

Hi Jggimi,

Many thanks for your reply. I ment traffic shaping by the word "controlling" and ment watching videos online like YouTube by the word "streaming".

If there is a way to shape video streaming traffic with my OpenBSD 5.3 firewall please guide me for that.

Thanks

CharlesZed · Unread post by **CharlesZed** » September 5th, 2019, 8:05 pm

Thanks for the reply, Hannu

Yes, I have managed to get SD card files streaming both using the AdaFruit boards SD card reader, as well as the Teesnys internal SD card reader.
My MP3 file is the same for both projects, so I know what I should be reading out of HDAT0/1 and my bit rate 44.1kHz.
Your reset could be little bit different.

EmileMer · Unread post by **EmileMer** » October 23rd, 2019, 11:49 am

There are several threads on the topic. I was using a Roxio HD Pro. Someone was using the Avermedia. Dont remember anyone having issues with any of them really...